Hydraulic Swing Beam marca Dener, modelo DMMH NC 3110
Standard Features Include:
• NC control unit
• 100 program memory (10 cutting steps per program)
• Manual blade gap adjustment
• Manual central lubrication system
• Table equipped with roller ball transfers
• Square arm with rear supporting nail in T slot
• Sheet support arms with rear nails in T slot
• Motorized back gauge 1000mm (39.37”) stroke with ball screws
• Hold down pads that ensure the fixing of sheet during shearing
• Cutting line illumination
• Adjustable stroke for short cuts
• Wear resistant high alloy steel blades
• Foot pedal stand with emergency stop
• CE confirmation
• Siemens electrical system
Options:
• Back protection with photocells
• Pneumatic sheet support system
• Motorized blade adjustment
• Light curtain for finger protection
• 500 mm (19.7”) throat depth
• Additional front sheet support
• Additional squaring arm (1 meter)
• Manual central lubrication system
• Motorized central lubrication system
• Hydraulic cooling system
• Spare blade
The MC Machinery warranty covers all parts found to be defective within a period of one (1) year (12 calendar months) from date of delivery. Labor is also covered during this period.
Actual delivery will be calculated after receipt of all MC Machinery paperwork. F.O.B. MC Machinery warehouse.
Agreed terms are indicated on a MC Machinery Sales Acknowledgement that must be signed following issue of purchase order. Net 30 days unless otherwise agreed upon.
MC Machinery shall retain a security interest in the equipment and goods until full payment is made. In case of default, MC Machinery shall be entitled to possession of the goods and/or the entire balance shall become due and payable immediately. A Security Agreement to that effect shall be executed between the Seller and Buyer.
MC Machinery or your authorized dealer will provide factory trained service for machine start-up after the customer has leveled the machine on the foundation, and the electrical connections and other pre-installation requirements have been completed by the customer. Electrical service to the press brake (and possibly air depending on the model) must be in place prior to our technician’s arrival.
Official orders for goods are only accepted with our Sales Acknowledgement Agreement, duly signed and returned to MC Machinery.
Filing of a UCC-1 Form prior to delivery will be required, unless 90% of the full purchase price of the equipment has been received by MC Machinery prior to shipment.
We thank you for the opportunity to quote on your machinery requirements. Please contact us if we can be of further assistance.
